Technische Daten (aus Herstellerdokumenten)
| Feld | Wert | Bedingung | Quelle |
|---|---|---|---|
| battery_cable_cross_section | 6 mm² Sicherheitsrelevant | 12 V; Kabellänge 0,5 m | victron_d0025 , Seite 8 |
| battery_cable_cross_section | 10 mm² Sicherheitsrelevant | 12 V; Kabellänge 1 m | victron_d0025 , Seite 8 |
| battery_cable_cross_section | 10 mm² Sicherheitsrelevant | 12 V; Kabellänge 2 m | victron_d0025 , Seite 8 |
| battery_cable_cross_section | 16 mm² Sicherheitsrelevant | 12 V; Kabellänge 5 m | victron_d0025 , Seite 8 |
| battery_cable_cross_section | 16 mm² Sicherheitsrelevant | 12 V; Kabellänge 10 m | victron_d0025 , Seite 8 |
| cable_strand_diameter_max | 0,4 mm Sicherheitsrelevant | Einzelader max. 0,125 mm² (AWG26) | victron_d0025 , Seite 4 |
| dc_fuse_rating | 60 A Sicherheitsrelevant | 12-V-Seite (Eingang oder Ausgang); je eine externe Sicherung an Eingangs- und Ausgangsbatterie | victron_d0025 , Seite 8 |
| galvanic_isolation | 200 V Sicherheitsrelevant | DC zwischen Eingang, Ausgang und Gehäuse | victron_d0021 , Seite 2 |
| short_circuit_output_current | 60 A Sicherheitsrelevant | - | victron_d0021 , Seite 2 |
| terminal_wire_size_max | 16 mm² Sicherheitsrelevant | AWG6 | victron_d0021 , Seite 2 |
| battery_terminal_type | Schraubklemmen | - | victron_d0021 , Seite 2 |
| continuous_output_power | 430 W | bei 25 °C | victron_d0021 , Seite 2 |
| continuous_output_power | 360 W | bei 40 °C | victron_d0021 , Seite 2 |
| data_interfaces | Bluetooth (kein VE.Direct-Anschluss) | - | victron_d0021 , Seite 2 |
| dc_input_voltage_max | 17 V | - | victron_d0021 , Seite 2 |
| dc_input_voltage_min | 8 V | bei Ausgang ≤ Nennspannung (Buck-Boost-Funktion, Fußnote 1) | victron_d0021 , Seite 2 |
| dc_low_restart_voltage | 7,5 V | Eingang | victron_d0021 , Seite 2 |
| derating | 3 % je °C über 40 °C | - | victron_d0021 , Seite 2 |
| dimension_depth | 80 mm | Modelle mit 12 V Ein-/Ausgang | victron_d0021 , Seite 2 |
| dimension_height | 130 mm | Modelle mit 12 V Ein-/Ausgang | victron_d0021 , Seite 2 |
| dimension_width | 186 mm | Modelle mit 12 V Ein-/Ausgang | victron_d0021 , Seite 2 |
| efficiency_peak | 87 % | - | victron_d0021 , Seite 2 |
| engine_running_signal | externes Signal >7 V am L-Pin übersteuert Motorabschalterkennung; nicht kombinierbar mit Fern-Ein/Aus-Option c | - | victron_d0025 , Seite 12 |
| humidity_max | 95 % | nicht kondensierend | victron_d0021 , Seite 2 |
| ingress_protection | IP43 (Elektronik); IP22 (Anschlussbereich) | - | victron_d0021 , Seite 2 |
| no_load_input_current | 80 mA | Angabe 'kleiner als' | victron_d0021 , Seite 2 |
| operating_temperature_max | 55 °C | - | victron_d0021 , Seite 2 |
| operating_temperature_min | -20 °C | - | victron_d0021 , Seite 2 |
| output_current_continuous | 30 A | bei Nennausgangsspannung und 40 °C | victron_d0021 , Seite 2 |
| output_current_max_short_time | 40 A | 10 s bei Nennausgangsspannung minus 20 % | victron_d0021 , Seite 2 |
| output_noise | 2 mV | rms | victron_d0021 , Seite 2 |
| output_voltage_adjust_range | 10–15 V | - | victron_d0021 , Seite 2 |
| output_voltage_nominal | 12,2 V | - | victron_d0021 , Seite 2 |
| output_voltage_tolerance | ±0,2 V | - | victron_d0021 , Seite 2 |
| power_supply_mode | ja – Ausgangsspannung per Bluetooth einstellbar | - | victron_d0021 , Seite 2 |
| remote_on_off | 2-polig (L/H): Drahtbrücke, Schalter, geschaltetes Plus/Minus oder isoliertes Kabel z. B. von (small)BMS | - | victron_d0025 , Seite 11 |
| safety_standards | EN 60950 | - | victron_d0021 , Seite 2 |
| smart_alternator_support | ja – Werkseinstellung funktioniert mit den meisten konventionellen und intelligenten Lichtmaschinen | - | victron_d0025 , Seite 14 |
| standby_current | 1 mA | Angabe 'kleiner als' | victron_d0021 , Seite 2 |
| under_voltage_threshold | 7 V | Eingang | victron_d0021 , Seite 2 |
| vehicle_approval | ECE R10-5 | - | victron_d0021 , Seite 2 |
| weight | 1,8 kg | Modelle mit 12-V-Eingang und/oder 12-V-Ausgang | victron_d0021 , Seite 2 |
Gerätebeziehungen
VictronConnect App (Baureihe, Praxis- und Kombinationswissen)
(Victron Energy)
Typ: konfiguration_überwachung · Schnittstelle: Bluetooth · Protokoll: Bluetooth · Status: freigegeben
Einschränkung: App zeigt keinen Eingangs-/Ausgangsstrom an
Einschränkung: App zeigt keinen Eingangs-/Ausgangsstrom an
smallBMS (Baureihe, Praxis- und Kombinationswissen)
(Victron Energy)
Typ: fernsteuerung · Schnittstelle: Fern-Ein/Aus (L/H) · Status: freigegeben
Victron BMS (allgemein) (Baureihe, Praxis- und Kombinationswissen)
(Victron Energy)
Typ: fernsteuerung · Schnittstelle: Fern-Ein/Aus (H-Pin, geschaltetes Plus) · Status: freigegeben